Great video on how to fix a hole in your wall .
Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.
If your looking for some more home inspection or home building ideas.
Wet Carpeting In HallwayAs the economy continues to go through major upheaval, banks are becoming increasingly reluctant to loan money - even to each other! The lending boom in which banks and lending institutions loaned money indiscriminately has led to a huge rise in home foreclosures, financial upheaval, and near disaster.
The $700 billion bailout has been turned down, and the everyday person is left to wonder, "What's next?" It's true - there may very well be a new bailout proposal that might pass in the future and it keeps happening - first the car industry, then the credit and banking industry. Expect more bailout proposals in the coming years.
And as with everything, this financial crisis will pass. But what is bound to linger is the fact that right now, and most likely in the future, it will be very difficult to get a loan for anything unless you have a good credit bureau report.
The days of securing a loan even with bad credit are over. If you want to finance a car, a home, a boat, a pool for the back yard or much of anything else, you must have good credit! So what do you do if your credit is less than stellar?
How are you ever going to be able to finance anything ever again? Your first step has got to be to repair your credit and make sure your credit bureau reports are correct. This might take a while to do, but if you get started now, you'll be in good shape for future purchases on credit. Here are the credit bureau report repair tips you will need to use:
1.) Get a copy of each of your credit bureau reports from the three major credit bureaus - Experian, Equifax and TransUnion. Without your credit reports, you can't move forward with fixing your credit.
2.) Review each report thoroughly. If you see errors, make a note of them. If any reports are missing good credit information, make a note of those as well.
3.) At this point it will be handy to start a filing system, perhaps folders, for each creditor that you need to contact to either fix faulty information or to add favorable information to you credit reports. You can keep your notes, letters you write to creditors and reporting agencies and other important information organized this way.
4.) If there are errors or omissions in your credit bureau reports, write letters to both the reporting bureaus and the creditors involved and provide them with as much detailed information as possible. You will want to include copies of any supporting documents and you might even want to include a copy of the credit report with the item in question circled if you are requesting a correction in a reporting error.
5.) Once you've contacted your creditors and the bureaus in writing, get copies of your credit reports again (you should wait 30 to 60 days to give them time to correct their errors). If the corrections you've requested aren't showing, write them again. It may be necessary to repeat this step a few times - the squeaky wheel will get greased most quickly.
6.) If you don't get the changes you've requested, you can contact the Federal Trade Commission and make your case known to them. Under the Fair Credit Reporting Act, they can help you get results.
7.) Be sure that once you've fixed any errors or omissions, you keep monitoring your credit report on a regular basis and that you always manage your money wisely to keep your credit score top-notch.
Making certain that your credit report is accurately reporting your credit history is your first step to credit repair. By using these credit bureau report repair tips, you will be forming the foundation for rebuilding your credit.
For more help in repairing your credit, turn to http://www.debtcredittips.com today!
Carpet Damage From CatIn real estate, first impressions truly are everything. In fact buyers can usually tell within the first few seconds of viewing a home whether or not it's the right choice. Call it intuition or a simple matter of taste but at the end of the day sellers must make sure the home exterior grabs attention.
The National Association of Realtors reports that sellers have the best return on investment with exterior remodeling projects which is a no brainer considering it's the first thing prospective clients see. These remodeling projects can encompass a number of things from vinyl sliding to wood decks.
Keeping in mind that since the exterior is what most people see, that's where sellers should put the majority of their funds. This is not to say that interiors should be overlooked as interior remodeling also has its sizable return on investment but in this case one must take into account the whole first impressions idea.
Remodeling does not necessarily have to involve (or be limited to) the actual home exterior as the landscaping can also have a dramatic effect in catching a buyer's attention from the outside. After all, a colorful and well maintained yard does give off an impression that the home is in good condition.
During these tough times when buyers are scarce, the more effort that's put into making a good first impression, the better the chances of finding a buyer. Always make sure that whatever funds are used towards any home remodeling are not funds which affect money used for an emergency or for long term savings.
For more information please visit http://www.southbeachboutiquerealty.com
Floor RepairsIf you intend to remodel your home, instead of just improving the decor and fixtures of your home, you could consider taking advantage of any extra space you have in your home.
This means that if you need an extra room, you could convert your basement and attic into additional rooms or game rooms that your family will really like and enjoy spending time in. many a times, this is a much better alternative than keeping these areas as dark and gloomy storage areas.
If you intend to remodel your basement, you have to first repair any water problems you have. This may take some time to get into operation; this is why it is better to get the help of a home inspector in solving water proofing problems. This way, you are sure that your new room will not have any water problems on completion.
Use the help of a professional designer
You have to decide what you intend to use your basement for depending on the conditions of the basement. Poor lighting suggests a dark room or home theater and an isolated atmosphere suggests a cushion for noisy stuff like a game room or hangout.
It is up to you to decide and make the right choice with the help of a professional designer. This way you will be able to make maximum use of the basements natural light with perhaps using large windows and glass bricks for added safety from thieves.
Remember that the basement may have few vents in it; so when remodeling, remember the need of good air circulation and place openings where needed. You could also install a carbon monoxide detector for safety reasons in picking up warnings of problems with venting.
Decide what you want to use your attic for
Besides remodeling the basement, you can remodel the attic for extra space. In doing so, once again, you have to consider what you intend to remodel the attic into. You can get ideas for this by thinking what you are in deficit of in the house; perhaps a bedroom, study room or a bathroom.
You can then get the help of a designer to design the place, and to give an estimate of remodeling costs; this way you will be able to decide if it is worth remodeling or not. Like if you intend to make a bathroom, consider if the costs incurred in building it like reinforcement in walls is worth the remodeling.
Also find out if local building codes and zoning laws permit an addition, your type of addition, the materials you intend to use, how you intend to provide access to the new structure and if reinforcement of walls and floor is required to hold any heavy equipment you intend to place in the additional space.
With all this covered, you should have no problems in remodeling your home, to use that extra spots in your home wisely.
James Tyler is the owner of Ace Builders, a residential remodeling company serving the Raleigh, North Carolina area. Tyler writes about issues relating to all types of remodeling and home improvement projects.
For more information, tips and advice visit http://www.acebuilders.net
Toilet Tank Lid CrackedA Quartz counter top may be the answer for people that love the appearance of granite but are concerned about by some of this stones short falls. Granite is a porous natural stone that can absorb liquids, it can soak up the stains of grease and cooking oils and can be etched by acids that are found in such ordinary household items as hairspray. Engineered quartz counter tops are not affected by any of these hazards.
Granite is also very unpredictable in its color or patterns between slabs, and this makes matching of portions of a counter top somewhat difficult at times. Engineered quartz kitchen counter tops are even in texture, color and pattern. The great benefit of quartz kitchen counter tops is that they provide almost all of the positive qualities of a natural stone like rich appearance and durability, but they are free from most of the drawbacks.
Quartz counter tops are man made. The manufacturing process to make quartz to a slab or counter top makes use of raw quartz crystals, one of the hardest substances available. After the quartz has been selected and ground, the crystals are then combined with resin, a bonding agent, and color. All of this is heated and vibro-compacted to create an impenetrable surface. The quartz counter tops have to be composed of at least 93% quartz or they can't claim the durability, impermeability or the hardness of a real quartz surface. The final product is non-porous, has great durability and is over two times stronger than granite.
Engineered Quartz counter top surfaces are available in a wide variety of colors that can't be found naturally because the crushed stone is usually combined with dye. You should take advantage of this versatility available for your kitchen design when you are considering quartz kitchen counter tops, so that they are able to dazzle the eye while still having the appearance of stone. The edge profiles on quartz kitchen counter tops can range from simple bevels to ogee and bullnose just as with natural stone.
The installation of engineered quartz counter tops is not a do-it-yourself project. You should have an experienced professional to do the job.
Because quartz is non-porous, its polished surfaces don't have to be sealed, like granite or other natural stones, in order to keep them from staining. Quartz surfacing is practically indestructible and pretty much maintenance free. It resists stains that are caused by fruit juices, wine, food coloring, fingernail polish and remover, tea and markers. The non-porous and non absorbing nature of a quartz counter top is very hygienic, it does not harbor bacteria, which makes it a safe choice for food handling in the kitchen. Cleaning your quartz kitchen counter tops is quite easy. It involves using a little soapy water or a mild cleaner.
These are not the cheapest kitchen countertop choice by any means, with a cost that rivals natural stone. The average cost of a quartz counter tops will be in the range of approximately $50 and up per square foot installed. Some of the common brand names you will look for include Silestone, Zodiaq and Cambria. You can find engineered quartz counter tops online if you have a problem locally.
If you are decorating your kitchen and want the rich look of natural stone without the maintenance requirements. You should take a serious look at the advantages available to you with quartz counter tops.
Get More information on kitchen counter top choices click here Soapstone kitchen counter tops. Also go to http://Countertops and Cabinets.Com where you can get a fresh view of kitchen design ideas, product information, news.
An alternative way to create electricity had always remained a big issue for every scientist and common man. The best possible way to produce alternate electricity is by wind power. Now the question arises is "how you can actually do it?" Thinking? You don't have to. I am suggesting a very good and effective method to do it. All you need is to make a wind turbine or a windmill (same thing).
Here goes the method to make it. It's very simple and anyone can make it by his own and using his home spare things.
Blades of wind turbine are turned by wind and the shaft spins, which is connected to the generator and electricity is produced.
Main parts of a wind turbine are:-
1) A generator
2) Blades
3) A mounting
4) A tower
5) Batteries
6) Electronic control system
A 30volt motor is needed. Now hub and blades are to be connected. For blades, take one 24 inch long pipe (may be pvc) and then cut it into 3 pieces by its circumference. For bolting blades into hub, a toothed pulley of 5 inches can be used, where the motor shaft can fit into. Now assemble blades with hub, by drilling holes.
Mounting of the turbine can be done by strapping the motor into a 2 X 4 wood piece. Heavy aluminum sheet can be used to make tail, which will keep turning into wind. 3 feet diameter plywood cutout can be used for tower base. A U-shaped assembly having a 1.5inch Tee in the middle has to be built. Batteries with blocking diode connected to batteries (for power prevention) are needed to spin motor/generator. Charge controller should be connected for running everything. The Controller is connected to wind turbine. Battery supply all load and needs to be charged. Well, you are done!
I know it's probably very difficult for you to understand all this, if you have never done anything similar before, that's why if you want to make your own windmill, I highly recommend you to use professional instructions, when assembling everything. Click here to find out to get them.
According to contractors, the room that is undergoing the greatest amount of transformation in new construction and remodeling is the bathroom. In fact, since the 1930s, the average master bath has tripled in size and the huge bathrooms build in houses today have even an oversized closet inside. The change in bathroom space is attributed to the fact that people are now spending more time in their bathrooms when they wish to relax while taking a bath. Experts point out, that the weekend spa mentality has developed into a new lifestyle trend with which Americans feel comfortable and want to experience on a daily basis without leaving the comfort of their own home.
Since the bathroom space has increased, the new updated version calls for an addition of bathroom furniture, which can make any bathroom feel less sterilized and bring in the feeling of comfort that used to be associated with other rooms of the house, like the bedroom or living-room. Moreover, the additional furniture pieces provide extra storage space; something that is definitely needed nowadays by both women and men. To cover the demand, many bathroom cabinet manufacturers offer now sinks set in furniture pieces, which are designed specifically for bathroom use. Options now range from modern glass and steel pieces, to old renaissance dressers and armoires. Moreover, people tend to mix and match furniture and trim their uncovered surfaces in order to make them blend with the flooring, connecting the bathroom to the rest of the house.
But apart from the amount of space available and selecting the right type of furniture, today's bathroom-users also want to create a bathroom in which they can relax and rejuvenate. These moments of relaxation can be enhanced with simple additions, like a bathroom stool near the tub or in the shower, or if the space permits it with an ottoman for some precious relaxing times. Furthermore, the right type of lighting can be installed quickly altering the feeling one has while taking a bath. Again candles, small regular lamps on the vanity or shelves can transform the bathroom and give it the feeling of tranquility.
Extremely important apart from the furniture selected is the bathroom's flooring. Tile or wood can enhance the overall appearance of the bathroom and their designs can be matched to blend with the house's other rooms. Also, the color of the walls or the wallpaper selected to be placed have to match the rest of the area, like the floor, the sink and the bathtub creating a unified outcome. If you decide to go with the wallpaper option, be extremely cautious as it has to be installed really well in order not to fall off the walls as you steam your bath.
Finally, keep your bathroom organized and clean. Numerous scattered items give a feeling of clutter and do not help you enjoy this room of your house. Furthermore, select towels and bathrobes that are soft and fluffy. It is better if their colors and design matches the rest of the bathroom, but most importantly they have to be replenished with new ones almost every year so you will continue feeling the same snugly sensation every time you exit the shower.
Jonathon Hardcastle writes articles on many topics including Home Improvement, Real Estate, and Home
Flat Tile RoofingStair building tips for installing lights and decking, handrail tips and some deck advice.
For more helpful home improvement information visit: http://www.gregvan.com
Structural Engineering BooksAn arcade, is a series of arches, lined up in a straight line or in a circle, columns or pillars have been used since ancient Egyptian times. The Romans used arcades and countless very different structures, the bleachers surrounding the theatre in some temples or in the Coliseum, and building of aqueducts.
A Column is a vertical support employed to support a horizontal structure of a building and can be circular or polygonal and its height must be at least four times greater than the width of the section. The first columns were made from logs or canes tied together.
The Dome is a concave deck of a building, usually in a hemispherical shape, until the nineteenth century they could only be built in stone or wood and were often reinforced with iron straps. However since the industrial revolution there have appeared numerous materials suitable for building a dome, such as cast iron, reinforced concrete, steel, aluminum, laminated wood or plastic.
Other important elements in these building systems are the structures that serve to bridge major structural points with a weight much lower than that of a conventional beam. The structures can be wood or steel and may take any form, since they are based on the branch structure formed in triangles. In the eighteenth century, mathematicians had learned to apply their knowledge to study the structures, making it possible to calculate the exact tensions that occur in any situation.
During the nineteenth century, engineering undertook many large scale construction works, such as bridges, dams and tunnels. This is essential for scientific progress in the building trade, as the calculation of a structures needs or the resistance of materials is essential.
Some types of structures such large buildings like warehouses, factories and even homes, as well as bridges or roads had not gone through many big changes as far as basic structure is concerned up until the last one hundred years. A large part of the changes that have occurred over the last century are based purely on the introduction of new technology and thus new materials.
A structure can now be formed in outrageous shapes and dimensions that even thirty years ago would have been beyond the comprehension of builders. These new materials continue to appear with exiting innovations being released each year to challenge the minds of not only big city architects but also more local institutions such as alteration services in Chester who are at the forefront of this ever changing building design in Chester.
Darrell F writing about building design in Cheshire and also refurbishment in Cheshire
Stair Guardrail ProblemWhen homeowners find a way to succeed in their home improvement projects, they are often quicker to repeat the projects in the future. This results in a more attractive house that the homeowner can be proud to live in. With a professional contractor at the helm, homeowners will find that painting does not have to be the major hassle many believe it to be.
With home contractors painting the house, homeowners can rest and relax knowing that their project is in excellent hands. This may give them the chance to sit back and relax or do other projects around the house that have been put off far too long. If everything goes right, having home contractors painting the house will hasten the process and have the project done much sooner than if the homeowner does the work him or herself or hires an amateur to do the work. With the professional edge to the project, it often comes out looking much better because of the training and skill these contractors possess.
Having home contractors painting the house will take a huge burden off the shoulders of homeowners who cannot seem to manage the task by themselves. They usually take their newly found free time and do another project so that the remodeling endeavor is sped up so that they can enjoy it much sooner. Nobody likes having their yard look like a jobsite for too long, so homeowners often turn to these professionals for help, and are usually greatly rewarded for the move.
More information on home contractors painting and College Works Painting resources in your area is just a click away.
Inspect The RoofAre you considering a move from your old house? Before making up your mind, consider looking into a home improvement remodel. Moving from your residence is a decision that will affect the future of every member of your family. However, because your family is growing, it's only a matter of time until you outgrow your home. Additionally, older homes in need of repair can end up costing you money just to maintain because they are not as efficient. Often, a few simple repairs and improvements are all a house needs to make it the home you desire.
The first thing to do is to take care of maintenance and repair issues that you may have been putting off. These repairs should be taken care of prior to considering any major remodeling project or room additions. It is a major concern if energy is wasted in your home, and a few changes can make your home more energy efficient. Some great ways to conserve on energy are to install good insulation and energy efficient windows. Then you may want to remodel your kitchen or bathroom, or perhaps you will want to add a room. If your kitchen and bath fixtures are outdated, you may be paying as much as 70% more in energy costs than you would if you replaced these fixtures with new, more energy efficient models.
As the costs of maintaining a home rise dramatically, you will be pleasantly surprised to find that your utility bills have decreased as a result of your energy efficient upgrades. In order to make the most of the money you've earmarked for home improvement, research various ways of increasing the energy efficiency of your home. Keep in mind that the best home remodel jobs will cause your home's value to grow.
Try to find a residential contractor with a good reputation and excellent references who will be able to suggest ways for you to reduce your energy costs. Once you have chosen your contractor, work closely with him or her as the home improvement work progresses. Going over budget can spell disaster for home remodeling projects! Prior to entering into a contract, make sure you and your contractor are in agreement. Make sure that quality work is done at a reasonable price. Ensuring that your project is finished in a timely manner and within the specified budget is crucial in helping you save money on the overall project.
Upon completion of your home improvement project, you will be glad that you chose to transform your old home into an attractive, spacious, energy efficient home your family will love. Your family has treasured memories of your current home, so spending some time and energy fixing it up and making it even more comfortable is well worth your while.
Skyah Jamsen, knows how difficult the housing market can be. After loosing her Grass Valley property, Skyah immediately began her search for Grass Valley homes for sale. Enlisting the help of a Grass Valley realtor from Nevada City Real Estate.
Custom Design HomeAn increasing number of businesses today rely on construction rental equipment to fulfill their equipment demands, while also reducing overall expenditures on equipment ownership costs. This has a two-fold benefit. One is that the business can free up more capital to focus on more core areas of the business and the other is that equipment demands can be fulfilled as and when the need arises.
No long-term expenses
Instead of spending enormous amounts of capital in purchasing hordes of equipment, it would do more good to rent them instead. There are several specialized equipment rental providers that can supply businesses with all the equipment that they require. Instead of having a long-term capital commitment, the business now only has a current expense, which can be written off easily. In addition, most rental costs are predictable and non-varying, making it easier for companies to prepare their budgets. Another strategic advantage of construction rental is that various license fees and property taxes are not applicable. This further reduces the expenses. In addition, with a rental there is no added expense of repairs and maintenance.
How to go about it
If you are interested in renting equipment then you need to ensure a few things. Firstly, you need to assess underfoot conditions at the working site. Depending on whether it is smooth concrete or loose gravel, the kind of equipment selected will differ. Long distance rides on the equipment may necessitate riding control features to make the navigation easier and less uncomfortable. Depending on the end usage of the machinery the dimensions of the equipment must be selected. Often, selecting small machinery pieces in an equipment rental is more efficient. If the job necessitates it then extra attachments maybe required to perform the function optimally.
Variety of equipments
There are several kinds of equipments that businesses can rent out these days. These vary from compaction rollers, backhoe loaders, compact wheel loaders, excavators, to hydraulic excavators, multi-terrain loaders, skid steer loaders, working tools designed for compact equipment, tractors with track-type systems, telehandlers, work tools for hydraulic excavators and many other types of tools.
Affordable pricing
In these days of recession, many businesses are turning to renting equipment to fulfill their work needs. However, there is so much competition in this sphere that most providers have been slashing their rental rates to get more business from customers. This is another reason why prices of renting equipment have gone down dramatically over the last few years. So if you want to get a bargain deal just step into any rental provider and see it for yourself!
It takes years of experience to stock the exact equipment you need. At One Call Rentals we have an extensive array of construction rental designed to fulfill all your construction requirements. No matter which domain you belong to, you will find our equipment rental services exceeding your expectations with exactly the tools you need!
Bathtub refinishing as the best green remodeling alternative benefits homeowners, hotels, motels by saving them money over replacement. For example, a new bathtub may cost as little as $300, but when you add the cost of tearing down that old bathtub, removing it, getting rid of the bathtub and all the fixtures, and then dumping all the mess including that heavy bathtub at the landfill. Bathtub refinishing benefits the environment.
Bathtub refinishing costs go up when you add the bathtub parts, tile work, flooring, carpentry and permits, you see the cost of replacing a bathtub can go into the thousands of dollars. So what you think was going to be a simple bathroom remodeling job, turn into an expensive job. Bathtub refinishing is done without a tear out and that alone saves a lot of money. You are dealing with one contractor, the bathtub refinishing contractor. Compare bathtub refinishing to replacement.
When a tub is refinished, it involves only one contractor, and there is no headache in scheduling. Replacing old bathtubs with new bathtubs, instead of refinishing, can impact the environment badly. Tub refinishing services, saves the landfills.
Bathtub refinishing benefits in a nutshell:
Savings of up to 80% the cost of bathtub replacement.
Savings in time since an average bathtub is refinished in about four hours and can be used 24 hours later.
Choice of many colors.
The environmental benefits of bathtub refinishing are many.
Bathtub refinishing is done in the bathroom. The tub is cleaned, primed and a special coating applied, all in the bathroom. There is no mess brought in during the process and none goes to the landfills after the bathtub is refinished.
This is very significant, since an estimated 47% of all the waste that goes to the landfills is from home remodeling or renovation. Fixtures like bathtubs, sinks, and cabinets are traditionally replaced, which means that they end up in the landfills adding to the environmental problems of replacement.
In addition, it takes a lot of energy to manufacture new fixtures that are used in home remodeling. The raw materials have to be sourced, then transported to the factory, using energy. It takes energy to manufacture the fixture and energy to transport it to the store. When fixtures are purchased, it takes energy to transport them to their final destination. Finally, energy is used in the installation of the new fixtures and the transportation of the old ones to the landfills.
Take for instance, the replacement of cabinets. It takes quite some trees and there we go again, yes, energy to transform a tree into a piece of furniture. Trees are needed for our survival. They clean our air, suck up carbon dioxide, and moderate the temperature of our environment. A lot of species, need trees for survival, and we need their survival for our survival. It is also known that old wood has more character and luster than the young trees that are snatched out of the forests for making furniture. Cutting down more and more trees, simply because one has not considered, refinishing as the best alternative to replacement is inexcusable.
Here are the fixtures that can be repaired and refinished and not replaced:
Bathtubs
Countertops
Kitchen cabinets
Bathroom marble bathtubs and sinks
Kitchen cabinets refinishing
As more and more people understand refinishing is a better alternative to replacement, the less and less fixtures go to our landfills. Equally important is the less energy we use when we refinish instead of replacing all fixtures during home improvement. To find out more information on how bathtub refinishing saves money, time and the environment, visit our website.
Wilson Ukah, owns Refinishing Stars, a bathtub refinishing company serving homeowners in Atlanta, Chattanooga, Nashville and Knoxville. Refinishing Stars, refinishes bathtubs, sinks, and countertops for hotels and motels nationwide. Wilson can be reached at http://www.refinishingstars.com or sales@refinishingstars.com.
Home Stucco BooksEvery homeowner appreciates quality construction and seldom thinks about it on a daily basis, unless the homeowner experiences sub standard quality every day in their own residence. What about the landscaping and decking outside the home? Just like the home interior, every deck should be able to be enjoyed all year round and can be provided that it has been well designed and expertly crafted. How does a homeowner determine quality when deciding to add a new deck or sun room to the home?
Unless the homeowner is in the residential construction business themselves, they are very likely unaware of the differing qualities of construction techniques, materials, and designs used in deck construction today. It is not as simple as assembling a platform and laying planks across the top over a weekend or two. Building codes need to be adhered to and inspections need to take place just like the home needed before it was able to be enjoyed by the owner. One must take into consideration the type of drainage the ground beneath has, type of weather the new construction will need to endure, and how much weight the new deck will need to support.
The best way to receive this quality craftsmanship and design is to examine past projects of the decking companies which are being considered for the job. If meticulous work has been taken in the actual design of the deck, then the homeowner can expect and should receive outstanding construction results. Looking through past projects in the companies portfolio is a good sound start, but questions need to be asked.
Some basic questions that should be asked are "What type of woods or synthetic boards are available for the construction of my new deck?" and "What types of fasteners are used or recommended in the assembly of my new deck?" From here the questions should be "Why?" Even though the prospective company will be designing and building the new deck, they should "want" to educate the customer regarding every aspect of their project and include them in every aspect of the decking adventure. If that desire to include and teach the customer about their new deck is not present, then a different company may want to be sought out. The final question a customer should ask is "What do I need to do in order to maintain my new deck?" There are just a few materials that require almost no maintenance at all unlike traditional woods. By maintaining the deck a customer can be assured of years of future outdoor enjoyment and entertaining barbecues.
The only word of caution to be aware of is if the price sounds too good to be true, it will be. Even the simplest design has detailed elements under the surface that require a great deal of time and planning not openly apparent to the customer. These elements are taken into account by the decking company when they provide the price estimate. When a deck design starts to incorporate detailed moldings, angles, and levels the price can climb to surprising heights. What the homeowner dreams and envisions may not be a realistic achievement. This is why it is important to discuss budgetary constraints early on so as not to waste your time as well as the decking company's time. This will ensure a minimum of stress and allow both parties to enjoy the whole project.
For more information and guidance about decks, sun rooms, room additions, and more, visit http://www.paradisedecking.com . Paradise Decking specializes in high quality, upscale decks, porches, sun rooms, and room additions, and the pictures in their gallery can provide you with fantastic ideas for your own home.
Daniel Elliott is an independent contractor who authors articles and media on a variety of topics for diverse audiences. WebDrafter.com, Inc. (http://www.webdrafter.com) produces Website design, hosting, and search engine marketing services for many of the clients, industries and markets related to the articles and media authored by Dan Elliott. If you would like Dan Elliott to ghost write or pen an article for you or your company, please contact him with your specifications.
For many years, hot tubs and home spas were the exclusive luxuries of the wealthy. They were expensive to buy, expensive to operate and not very reliable. With the onset of better manufacturing and better materials, and lower prices, however, the popularity of hot tubs and home spas began to soar.
Spas Throughout History
History gives us many examples of spas being used as integral parts of life for many civilizations. The Romans are perhaps the most famous for their bathhouses, which became centers of social life and a common daily activity for the elite classes. Other cultures made use of spa-like hot baths as well, including the ancient peoples of China and Japan.
What did these civilizations know that others didnt? Setting aside technological differences, some of the earliest spa enthusiasts appreciated the health benefits of using hot water to relax the body, open the pores of the skin, and generally promote better health. Cleanliness was considered healthful and a sign of prosperity after all, you had to be pretty well off to afford the bath facilities themselves and to have the leisure time to partake of their benefits.
Hot Tub Hydrotherapy
As medical science has advanced, there has been an increased awareness of the benefits of hot tub hydrotherapy. Many medical conditions, injuries and other health problems can be eased or improved with regular hydrotherapy treatments.
For example, people with arthritis, multiple sclerosis, paralysis and other conditions that involve deteriorating range of motion benefit from time spent in a hot tub. The warm water helps ease aches and pains, while loosening joints and making them easier to move and keep mobile.
Joint problems, chronic back pain and other painful conditions resulting from injuries are also helped with regular hot tub hydrotherapy. Those seeking stress relief, general relaxation, and quiet opportunities for conversation commonly experience significant hot tub benefits as well.
Modern Spa and Hot Tub Hydrotherapy
Modern technology, materials and production processes make it possible to design and build home spas and hot tubs with highly specialized hydrotherapy features. These features are typically based on a combination of seating position, jet position and jet function. Lets look at each of these aspects in turn.
Seating Position Traditional hot tub seating was bench-style, typically in a round shape and at a uniform depth so that everyone sat at the same level in the tub. This made it challenging for people of different heights to fully benefit from hot tub therapy.
With the development of molded fiberglass spa shells came the development of different shapes and sizes of seats. Manufacturers began to include lounge seats, where the bather reclines in the water, as well as seats to accommodate bathers of different heights. Some also included deeper seats, designed to fully immerse the bather and allow placement of jets in specific positions for specific benefits.
Jet Position Moldable shell manufacturing made it possible for the first time to place jets in nearly any position within the tub. Manufacturers began experimenting with placing jets in places where they would focus on specific areas of the body, such as the back, neck, shoulders, arms and legs.
The earliest jets were single-action nozzles with limited ability to adjust where they were aimed or the intensity of the jet action. This made it difficult to use them in positions where they would affect more tender areas of the body, such as wrists, forearms, ankles, feet and knees. As manufacturers developed more advanced jets with a wider variety of functionality, though, the technology of hydrotherapy advanced significantly.
Jet Function Modern hot tubs and spas can be customized with a surprising variety of jets that range from multi-purpose to highly specialized. Buyers often are able to select exactly which jets to install in specific locations within their hot tub or home spa.
The most common types of jets available today include:
Swirl jets water swirls in a circular pattern, with a massaging action that covers a wide area
Whirlpool jets a large, round jet that concentrates pressure in a specific area
Mini jets smaller than standard jets, they are often grouped together in clusters, especially in massage and therapy seats
Pillow jets combines massaging action for the neck with a pillow designed to let the bather rest their head without going under water
Shoulder jets positioned above the water line to focus attention of specific parts of the shoulder
Moving massage jets this oval-shaped jet moves back and forth in a sweeping motion to provide pulsating therapy
The benefits of different jet types have grown substantially with the development of independent seating control. In older spas and hot tubs, one set of controls ran all of the therapy jets, but independent seating control allows each bather to control the strength and intensity of therapy in their own individual seat.
Hydrotherapy for Fitness
The latest technology in hydrotherapy involves using jetted tubs for fitness purposes. This new generation of home spas is elongated in shape and allows the bather to choose traditional spas functions or switch over to functions that allow for a vigorous workout. They are commonly referred to as swim spas.
A swim spa has powerful jets that set up a strong resistance current that allows the user to swim as if in a full sized lap pool. The elongated shape allows even the tallest people to stretch out into a full-length stroke and the center depth is such that even a full arm extension will not bump into the bottom of the spa.
Adjustable current jets make it possible to adjust workout intensity depending on the users fitness level, and increase intensity over time as the level of fitness improves.
Summary
Spas and hot tubs have been around in one form or another for centuries, but only in the last few decades have technology, materials and manufacturing improved to the point where a home spa is affordable enough and reliable enough to be within reach of most people.
Hot tub hydrotherapy is one of the most popular and effective ways to treat a wide variety of medical conditions, injuries, or simply promote relaxation and stress relief. Once you have experienced the benefits of a home spa or hot tub, you will wonder how you ever lived without one!
Julie Ann-Amos is a freelance writer for Hot Tubs 'N Home Spas.com, providing consumer information onportable hot tubs and home spas. She has reviewed dozens ofhot tubs and home spas and contributed articles on choosinghot tub spa enclosures and gazebos.Copyright 2005 Hot-Tubs-N-Home-Spas.com
Permission is granted to publish this article on your site only if the author's byline is included and all 3 links are hyperlinked.
For those who bought an older home and have just been delivered safely through a cold winter, you are lucky; many home owners buy older homes that have inadequate insulation, and wonder how to solve the problem without wrecking the interior or exterior decorating job. Well, there are several options available and some of them offer minimal intrusion to the decor.
Areas which let in the cold are, traditionally, doors, windows, ceilings, floors and walls. Ha! What else is there?
Let's attack these in the order of least expense: It is fairly inexpensive to seal doors and windows using caulking or weather strip, but you should only consider this route if you feel that drafts are coming in this way. Coldness coming in is a different matter. If your windows are not double glazed, you will feel coldness coming through the pane of glass.
If you wish to hold off on permanent double glazing, there is a system that is inexpensive and easy to do and which will shrink your heating bills. Your local builders' yard or hardware store will probably carry special 'cling film' packs to double-glaze your windows; they are inexpensive and effective. They can be installed easily, by you, on the inside or outside. A big difference will be felt if you at least cover the north, west and east windows. The money in heating costs that you save by using them may pay for your new double glazed window units within three years.
A storm door is also great for keeping in the warmth. It's just an extra door in front of your front door, and it helps to keep out the worst drafts and cold.
Ceilings are not so difficult to insulate if you can access your attic. The level you want is between R38 and R60.
The biggest loss of heat is probably also the most expensive to correct - that of the walls. When building a home, it is fairly inexpensive to lay the pink insulation between the outer and inner wall. However, this is not an option in an existing home.
The best option is to choose a local company to 'blow-in' or 'spray in' the insulation using their special machinery. This comes in the form of fiberglass, foam or cellulose. Foam is the most thorough (it gets into all the crevices) and the most expensive, with fiberglass coming up a close second.
This system can save an estimated 30% on your bills. It can also be blown into attics, so it may be worth getting two quotes: one for walls only and one for walls and attic, and then you can choose.
If you have an un-insulated basement, now would be a good time to insulate it; it is not a difficult job and it is one of the improvements that will greatly decrease the size of your heating bill. Meanwhile if you feel cold air coming up from the basement, think of hanging a curtain or installing a permanent door to block off the part that is not heated.
One of the simplest things to remember is natural energy. If you plan to re-model your home, and you can choose where to put a window, place it on the southern side of the house. A small overhang will stop it getting too hot in the summer (24 inches is ample) and the winter sun will still peep below it and warm up your room in the winter.
While we're on the subject of natural energy, it has almost been forgotten that trees can be a considerable help. If you plant evergreens near your north and west walls, you will be protecting your house from cold and wind. Since these walls will not get much (if any) sun, you will not be blocking out the warmth of its rays.
Conversely, if you plant deciduous trees (which drop their leaves in the fall) outside your south and east windows, they will allow the sun to warm your windows in the winter, but in the summer their leaves will shelter the window and you will not feel the heat so much.
If you're looking to relocate to Alberta, be sure to check out Justin Havre's Calgary Real Estate Site. Visit JustinHavre.com today for the latest information on Calgary property
Sometimes as contractors we get in a hurry and we just want to finish the job. We told the homeowner we would be done in three months, at the same time the homeowner keeps adding new work to the list.
I ran into a problem like this on one job where the contractor was in a hurry to finish the flooring and chose to go right over the existing floor that was out of level. He told the homeowner he didn't have time to repair that section of the floor. He was installing half-inch plywood over 1 x 6 diagonal floor sheeting to strengthen up the floor.
This floor was going to require quite a bit of attention from the contractor and his crew. The homeowner should have hired another contractor to repair the floor while the original contractor finished the house remodel. When your contractor gives you that much grief about any work, you need to start thinking about hiring another contractor or at least finding one to complete the task your original contractor has no interest in.
I felt sorry for the homeowner because this was not what he wanted and he was upset with the contractor but the job was done. This is my warning to any contractor, handyman or home repair specialists. When installing a new plywood floor over an existing floor to strengthen it up, use some common sense and repair the floor correctly or don't do the job at all.
I wrote this article for contractors to have a little more sympathy for the homeowners you are working for because sometimes they can't see the whole picture like you can. I also wrote this article for homeowners to listen to your contractor carefully when he is explaining a potential problem that you can't visualize further down the road. Any contractor with over 15 years experience remodeling homes has a pretty good idea what's going to happen next.
Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.
Home Building BooksIf somebody were to ask you the question, who needs flood insurance? The obvious response to that question would be someone who lives in a flood zone. Someone who lives close to the shore in an area known to be at risk for flooding. And while that's true anyone living in an area like that should have flood insurance, it may also be a good idea for people living in lower risk areas to get some flood coverage.
25% of all flood loss claims are filed in areas of low to moderate flood risk. Floods can happen even in areas that you wouldn't think would be at high risk. It doesn't always take a raging river overflowing its banks to cause flood damage. In a strong rainstorm the sewer system and storm drains can get backed up, become blocked, and then overflow. This can cause flood damage in areas where you would least expect it.
When floods do happen in a low-risk area too many people learn the hard way that flood damage is not covered by a standard homeowners insurance policy. To be protected from flood damage you need to carry additional insurance. Fortunately for the people who live in low to moderate risk areas flood insurance can be obtained at very affordable rates. The rates vary according to how much coverage you need and the level of risk.
If you live right on the shore of a river with a history of flooding then you will definitely pay more for your coverage and it may even be difficult to obtain coverage in that situation. If you live in an area of low to moderate risk the cost will be substantially cheaper. In lower risk areas you can get policies that will cover your home and its contents starting at just $119 per year in premiums. And considering that just 2 inches of water inside your house can cause over $8,000 worth of damage an inexpensive policy like this may be a good idea.
Learn the facts about homeowners insurance. How much you need and how to save money on homeowners insurance Educate yourself and protect your home and your financial well being from a potential disaster. http://homeowners-insurance-questions.info
When deciding on which type of foundation (basement, crawl space, or a slab) for your new home, there are many different factors to consider. In some parts of the country full basements will be the norm (most common in the north), while others will have slab foundations (most common in the south) and still others will have crawl spaces (most common in the central regions). Many people, because of local soil and groundwater conditions, often have only one or two options when it comes to house foundations. In certain places, constructing a full basement means blasting through solid rock. In other places, the ground water table may be lurking just a few feet below the surface limiting these folks to a simple slab on grade.
Keep in mind, that if you are planning a crawl space, and all of your neighbors have basements, your house may be more difficult to sell unless you are prepared to lower the price. This is simply a value/price perception issue since many people feel that having a full basement gives them more room even if it is used only for storage purposes. And of course, the potential is always there for someone to finish the basement and add extra living space at some time in the future.
The concrete slab choice is attractive to builders because of its relatively low cost. Excavation is kept to a minimum and the construction schedule can often be accelerated. The day after the slab is poured, wall framing can often begin. But slabs come with some negatives. Typically, plumbing drainage and water supply lines are buried beneath the slab. If something goes wrong or a leak develops, repairs can be costly. Heating or cooling ductwork buried underneath the slab (not recommended) can sometimes fill with water during wet seasons. Should this happen, fungus can form and spores might be blasted into the home each time the HVAC starts up. Thermal conduction issues are always present. Slabs poured in colder climates can conduct cold back into the house unless special precautions are taken when built. Homes built on slabs often offer little protection during tornadoes or hurricanes, unless a special masonry or concrete safe room is built within the house. These safe rooms can be designed as a large walk-in closet.
A crawl space foundation is a step or two above a slab foundation. Generally speaking, a footing needs to be poured and short foundation walls are built to support the home. Crawl space foundations allow you to install plumbing and HVAC systems so that they are accessible. The floor system over and the foundation walls inside of the crawl space almost always need to be insulated. A vapor barrier must be placed over the soil in the crawl space to control moisture, preferably one that is sealed at its seams & to the foundation walls. If this vapor barrier is missing, water vapor will readily travel up into the wood floor system and then into the house. This water vapor can cause severe mold problems. Homes built over crawl spaces offer minimal protection in severe weather unless you can install a floor access door in a closet that allows quick entry into the crawl space, assuming there is sufficient clearance.
As for basements, ask any homeowner who has a dry full height foundation and they will often tell you they would never be without one. The cost per square foot for this bonus space is often a fraction of what you pay for the living space stacked above it. If you do an actual cost analysis of a full height foundation versus a crawl space, you will find it costs very little to upgrade to the full foundation. Typically, full basements make a house more attractive to potential buyers.
A full foundation offers superb protection in the event of severe weather. It is not difficult to keep basements dry, even in extreme wet weather. The builder simply needs to install a proper drainage system around the perimeter and to apply a real waterproofing material such as synthetic rubber or liquid asphalt that has rubber additives. These materials can bridge small hairline cracks that might otherwise leak water. If you intend to finish off the basement space at a later date, be sure to install a true waterproofing material not the traditional hot asphalt damp-proofing spray.
If you can afford the extra cost, ask your builder to consider extra height foundation walls that allow you to have a clear ceiling height of eight feet or more beneath any and all beams that support floor joists, so that finishing the space at a later time will be easier and provide proper ceiling height.
Mac has remodeled many old homes, been employed in several different construction trades & is a major do-it-yourselfer. He currently owns a home inspection company and has been inspecting homes for many years which is where my experience is most relevant to the proper way to build a home. To learn more about building your dream home, visit my website, http://www.house-building-tips.net
Shower Seat Hot Moped With TarWill that new HDTV and home entertainment center fit in your existing space, or will you have to remodel the room to make it fit? How can you communicate the size available vs. the size needed? Do you know what's there now and what was there previously?
What did your living room look like before you remodeled it? What will it look like after the furniture is re-arranged? Your inventory and photo records help make the job of moving furniture matching wall colors, and shopping for new wall and floor coverings a lot easier!
Begin by looking through the old photos taken during the holiday seasons or other occasions. They will help you put together a more detailed sketch of what the rooms looked like at earlier times. These will give you an idea of how the room looked at that time. They may also reveal before remodeling issues like walls or doorways that have been changed.
Now is the time to update views of your rooms. Take photos of various directions of the room. The color photos may even be taken without flash to give you a better idea of how natural window lighting impacts overall view and shadows in the room. Take photos at eye level when standing in the entry, seated in your favorite chair and from a child's eye view.
Copies of these photos can then be added to the room inventory that you develop and maintain from now on as you make changes and update room furnishings. Some of the current photo storage and software options permit storing the file off site. This can be extremely valuable if you ever have a flood, fire or other disaster.
A more valuable benefit of these records comes during the shopping phase prior to purchase of window coverings, wallpaper, paint, art, furniture or floor coverings. These references should also contain reference measurements like room width, room length and ceiling height. While you're measuring, don't forget to measure door widths and sketch out the locations and measurements for wall electrical outlets, hearing and air conditioning vents and registers.
With the current schedule of communication changes, especially HDTV, many consumers are purchasing new, larger screed HDTV units. While the sales people are very helpful at suggesting a larger screen format, you may find that it is just too big for the space available!
How do you plan to upgrade the present equipment and furnishings? Can you do it yourself? If you plan to have someone else do it like a local handyman or interior design or home furnishing company, your planning, outlined above can greatly reduce down time, cost and ultimate satisfaction with the finished job.
Dennis Bries
http://briespix.com Home and Yard Improvements don't 'just happen' they need to be planned.
What if I told you where to get the ultimate fence building Encyclopedia? Better yet, what if I told you, you could get it for under $20? If you're building a standard 1 x 6 dogeared fence, that's 6 foot tall and made from wood, with 4x4 post cemented into the ground, this book might not interest you, but if you're thinking about building a fence, that will make all your neighbors jealous, you might be interested in the "Fence Building Bible."
If you're interested in using your imagination, along with some of the information in this fence building Encyclopedia, if you're interested in creating a masterpiece, instead of just another barrier that divides the property, you had better think seriously about, either running down to your local library and checking the book out, or purchasing the book, so that you have it on hand when needed.
Here's a quote from the product description that could be helpful, "Beneke suggests the appropriate types of fence to keep the swimming pool secure, con fine the livestock, keep deer away from the garden, or create outdoor living spaces. He then discusses the essentials of proper fence design and provides step-by-step illustrated instructions for planning, building, maintaining, and repairing any style of fence."
If you're planning on building a fence to keep livestock, it would be extremely helpful to know what kind of fence will be necessary to keep pigs or cows separated from the other animals, including you. There's nothing worse than building a new fence, putting some large cattle inside of it and having them tear it apart and escape.
The fence building Bible as simple instructions, with lots of illustrations, to give you plenty of ideas. There's a good chance that you will see a fence in this book that you have never seen before. If you're thinking about building something out of the ordinary, I would suggest strongly, that find this book.
Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors.
If you're really interested in learning more about remodeling, new home construction, home maintenance, home repairs and really want to get the nuts and bolts of home improvement. Visit our web site and select from the best-selling home building books on the Internet.
Do you want your wedding to be serene and stylish at the same time? Then consider designing a wedding with a Zen style. You will enjoy your special day in a feeling of bliss.
Zen style is simple and clean and peaceful. It is relaxing, and can also be quite modern and chic. It is a great idea for a wedding theme, as you and your guests will feel quite at ease in the oasis that you create. For a few ideas on how to have a Zen wedding, read on...
Think about your wedding location. A space like an open loft in a city with great hardwood floors and lots of natural light would be one excellent option. Another possibility is an outdoor setting. An Asian inspired garden would be ideal, as would a setting near running water, which will make a soothing background sound.
A peaceful color palette is a great place to being when creating your Zen design. Soft colors from nature like taupe, celadon, and pale blue work beautifully in combination with an accent color like espresso. Your color scheme will be serene and modern at the same time. Patterns that use some of the colors together in a stripe would make a very pleasing addition to the overall wedding dcor.
Your color palette can be carried throughout the wedding. You will certainly want to use it for your bridesmaid dresses. Tea length chiffon dresses in celadon or pale blue would be lovely. To add a little punch, choose ones that also use the espresso accent color, either in a sash, or as a wide border at the hemline. For the bridesmaid jewelry sets, think simple and clean lines, such as elegant sterling silver pieces. Bridesmaid jewelry sets that use elements with a natural and organic form, like keshi pearls, would also be wonderful for your Zen wedding.
For your wedding dcor, imagine a fabulous Asian inspired spa setting. Think about ways to incorporate natural elements, such as smooth rocks, bamboo, seagrass, and even water. A great touch for a Zen theme wedding would be to have a water element, such as a simple modern fountain, or another source of running water. If your venue does not have such a feature, see about renting or even custom designing a piece like a copper wall fountain to add the tranquil sound of water to your reception.
In keeping with the idea of being in harmony with nature and the senses, your reception menu should include foods that are fresh, light, and seasonal. If you love Asian food, then you could go with a Pan-Asian menu, but you could also choose to feature your local cuisine, preferably fresh from the farm. Roasted vegetables, free range chicken and artisanal cheeses are all wonderful menu choices.
For the ultimate in Zen wedding design, consider hiring a feng shui expert to design the floorplan of your reception. You will be ensured that the vibe at your wedding is as serene as possible. In addition, you will ensure good flow throughout the room, as well as the best luck to get your marriage off to a happy and harmonious start. If a wedding theme can do all that, then who wouldn't want to have their big day be as Zen as possible?
Look to Bridget for advice on planning your wedding. Check out how we can help with your bridesmaids jewelry at SilverlandJewelry.com. Bridesmaid jewelry sets should reflect the style and theme of your wedding
If you're having problems with your Windows opening and closing, you can apply a little wax on the tracking. It's been a long time since anyone has used this trick, I thought I would share it with homeowners and professionals alike. My grandfather was a master Carpenter and he always had a small candle in his nailbags or toolbox.
I personally have tried wax, grease, silicone lubricant, oil, vegetable oil and wax seems to work about the best. I sprayed silicon lubricant on my windows and within a few months there was a nice collection of dirt, where I had applied the lubricant on the tracking and it was gummed up around the operating parts of the window. The dirt eventually made the window harder to slide and needed to be disassembled, cleaned and reassembled.
I've used silicon lubricant on quite a few things and had the same results. Wax can also attract dirt but somehow doesn't seem to collect as much of it as oil, grease and other lubricants.
Wax used as a lubricant often works best on horizontal sliding windows, these are windows that slide right to left and you will need to lubricate the tracking that the wheels roll on. Some windows have teflon inserts on the section of the window that slides. Either way you can apply the wax to the bottom of the window track and soon you will have a window that slides back and forth with ease.
If you apply the wax and it doesn't help the window slide easier, you could have a problem with the rollers on the window, teflon inserts or the tracking. Sometimes the window tracking and rollers just need to be cleaned in order for the window to slide effortlessly.
You are free to copy this article to your site as long as you include the following resource information with an active link to my site:
Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers advice to take some of the frustration out of home shopping.
Moisture On Vapor BarrierWith the recent hurricanes in the southern United States the number of flood vehicles entering the market has skyrocketed. Many of these vehicles have been declared as salvage by insurance companies who have paid off the original owner of the car under a claim. There are steps you can take to protect yourself from buying these salvaged vehicles that have extensive water damage.
Many people may not realize they have bought a flooded car until they take it to get insured. They then find out that their agent can't even issue them an insurance rate quote because of the salvage title on the vehicle. Since used cars are usually sold "as is" there is very little recourse the buyer has at this point other than to try and get the vehicle road-worthy and go through a length inspection process with the state motor vehicle bureau that is required for a vehicle with a salvaged title.
So how can you protect yourself from buying such a car? One of the easiest ways is to obtain a vehicle history report from a firm like CARFAX which tracks flooded vehicles and other types of damage. You can also do some detective work yourself on the vehicle if you have doubts. Look inside the engine compartment and see if there are any tell-tale water mark signs that might indicate high water levels. Next, check under carpeting to see if there is mold or any presence of water staining. Finally, inspect the electrical system thoroughly. This is where most water problems show up first as electricity and water are not exactly the best of friends.
You can protect yourself from purchasing a flooded vehicle by being a diligent consumer. If you suspect a car or truck has been water damaged just walk away from the deal.
Marvin Toller is a writer and internet publisher who likes to write about http://www.11-car-insurance.com car insurance as well as insurance issues in general. Check out his car insurance news and in depth information website http://www.11-car-insurance.com
Gutter leaf guards are meant to keep leaves off gutters. This is because the leaves block the water in the gutter making them overflow. Gutter leaf guards are not only made for leaves, they keep off debris and any other objects that fall on the roof. In addition, they prevent the debris from rolling into the gutters or people's yards.
There are various types of gutter leaf guards. These are gutter screens and surface tension models. Gutter screens are characterized by a mesh that acts as a sieve, which is a barrier to the leaves and debris. Rainwater flows past the mesh ensuring the gutters are always clean. Gutter screens have different sizes of holes and this allows the user to choose the right size they want. Gutter screens with large holes are suitable for larger debris and sticks while smaller holes are ideal for leaves and small stones. Gutter screens are not that effective. However, since they do not have the small holes that prevent small debris like sands, they restrict larger debris and big leaves. Another problem is that they need constant cleaning of the restricted debris. This is because if the leaves and the debris accumulate, the holes are closed and they restrict water from flowing past the debris and this causes overflows on the roof. Cleaning the gutter screens is not tiresome, more so during a sunny day when the debris that has collected on the mesh is dry.
Surface tension models are gutter leaf guards that close the gutter opening completely and are close to the roof surface thus they are named 'surface'. They leave a small opening that only allows water to flow through and this makes the surface tension models better than the gutter screens. They have circular rims that are curved backwards and this makes the debris and the leaves that are restricted to roll over to the edge where they accumulate while the water flows through. This is a better method of guarding leaves and debris since the leaves do not collect at the entrance of the water and so there will be no overflows on the roof. The surface tension models too do not restrict the tiny debris like sands and thus there is no a perfect gutter leaf guard. The surface tension model leaf guards are easier to clean since the elevation ensures that debris is collected automatically. Some of the surface tension models are elevated to a greater angle and this drops the collected debris to the ground.
The shape of the roof determines the kind of gutter leaf guard that one uses. The slanting roof is ideal for the surface tension model since the slight elevation allows the restricted debris and leaves to roll over and collect in one place while the gutter screens are ideal for the flat roofs since they catch all the debris that falls from above the roof.
The surface tension models are more expensive than the gutter screens and this makes the gutter screens more common since most people prefer the cheaper gutter leaf guards .
For more information about gutter leaf guards, please visit http://www.gutterguards.ws
Another article that may be of interest to you is entitled, Copper Rain Gutters. It can be found by clicking on the following link: http://www.gutterguards.ws/Copper-Rain-Gutters.html
Installing Wood Doors In The SummerNo matter what type of metal building you are considering, making the wrong purchasing decisions from not being properly informed can be extremely costly. Whether you're looking at commercial metal buildings, farm buildings, garage or shop buildings, not knowing what needs to be considered can be just as costly. Here is a list of items to think about before you purchase.
1. What use will your new prefabricated metal building have? (This is not as simple as it may sound)
2. What size should your new metal building package be? (Consider this point carefully)
3. Of the many types of prefab buildings, which is right for you?
4. What accessories do you require in your prefab metal building? (If you don't ask, you won't receive)
5. Get your metal building package priced (from more than one supplier).
6. Do a complete analysis of the metal building prices.
7. Should you hire or self-erect your metal building package? (Keep in mind the cost of equipment rentals if required)
8. When is the best time to purchase prefab buildings?
9. How will you plan and schedule for your new prefabricated metal building? (This is closely related the step above)
Now each of these items can be broken down considerably and indeed should be. Some may even seem to be 'no-brainers'. Don't be fooled. There is more to be considered than what you might think even for a question as simple as 'What is my metal building going to be used for?' But if you consider each of these steps well, you can assure yourself that you have done due diligence and your purchase decision will be a well informed and much les stressful one. And you just may save thousands of dollars!
For an extended version of this article visit Pre-Fab Metal Buildings. PrefabMetalBuildingKits.com is a website dedicated to metal buildings. Visit us at Metal Building Kits.
Roof Drain Stain On StuccoYour interior walls are a direct reflection of your home and all that it is. From the moment you enter a home it is the condition of the walls that make such a profound and indelible impression. When walls have been beautifully painted and the color(s) have been tastefully selected to graciously accent the surrounding area; the sight can't be anything short of resplendent. That's the effect that walls handsomely done can have on you.
Your house walls consist of more square footage than your ceilings, floors and everything else; so it is imperative that they should be addressed in a very special way. To neglect to do so would be just short of criminal, I think. Your walls make a statement that can be warm and inviting, or cold, negligent and uninviting...it all depends on you. Here is a guide that can help you give your walls a new and appealing appearance, all the while potentially saving yourself a great deal of money; not to mention the satisfaction that comes along with doing a good job yourself, so let's begin the journey.
PREPARATION
Whether your house interior walls consist of : gypsum board/drywall, plaster, simulated plaster, plywood, or wood paneling; before painting it you will need to prepare the substrate (surface) to receive the paint or finish coat. Herein lies the work, however, some cases may prove to be less demanding then others, but it is so important to get it right here because this literally is the foundation on which you will build, for instance, if your walls consist of drywall or sheetrock, as it is most commonly known; you must inspect it thoroughly before proceeding. Check to see if there are any small holes, cracks, mapping lines; not to mention pits, large holes and possibly failing drywall tape. A careful inspection should shed some light on what you really need to do in order to get the walls ready and worthy to receive paint. And if you do need to remove the existing tape and replace it with new tape, then by all means do so. If you have a large hole in your walls you may need to install a piece of new drywall and finish it out. Sometimes, installing a whole new drywall panel is necessary when the hole is extremely large, but whether you're installing a new panel, partial panel, or just skimming over some areas try to do a good job by keeping your work smooth and neat. After all, every thing that you do at this stage will definitely show up in the finish work. So remember to keep it neat and smooth throughout your repairing and preparation stages.
If your interior walls consist of plaster and repairs are in order, again, smoothness and neatness are the operative words. Superficial or cosmetic repairs to plaster can be done by most homeowners, however, if you have a more serious problems such as: plaster falling to the floor; failing lath, large size crevices and cracks---call a reputable plaster contractor right away! But as I stated earlier, many simple repairs can be successfully done by the homeowner.
Your walls might consist of wood, if that is the case, be sure to take the time to inspect it carefully to see if you have any problems, if so, try to correct them as neatly and professionally as you possibly can. You can fill in dents and small holes with a good wood filler, and then sand it smooth with an electrical sander, or maybe you can hand sand it and avoid using electrical sanders that can quickly cause damage to your wood. And with using any electrical tools always work safely and wear full safety gear. If some of your wood boards or paneling need to be replaced then do so. The key to beautiful walls is properly preparing your substrate to achieve a uniform and symmetrical look...and that applies to any type material that your walls may consist of.
PRIMING YOUR WALLS
Now that your walls have been carefully prepared/repaired and thoroughly cleaned, you are now ready to begin priming. Priming your walls is a very important step in getting your walls ready to paint. To neglect to do this is plain folly in every sense of the word. And to use anything less than a quality primer is truly gambling with the out come of your project.
Donald Thomas is owner and CEO of AMERICAN PAINTING AND PRESSURE CLEANING, INC. He has been in the home improvement business since 1984. Please feel free to visit our website for more full length feature articles and a lot of great tools and equipment. http://www.americanpaintingandpressurecleaninginc.com
Temporary Ceiling RepairSolar outdoor lights are becoming more popular among home and property owners. Such gadgets that are considered standouts are the solar flood lights. A home owner usually utilizes lighting in order to provide more illumination to the landscape, especially during nighttime. Likewise, another concern when employing lights is to enhance security and safety around your property.
As conventional lighting that uses electricity can become a cause for you to pay higher utility bills, a good alternative are solar outdoor lighting. Sun powered products such as solar powered flood lights are quite easy for anyone to install given the simple and few parts that they have. Albeit, the latest in the solar technology as made the solar flood lights brighter and more efficient.
Flood lights can effectively provide better and more enhancing lighting. It is meant to highlight any garden feature or structure. Likewise, such lights can be depended on in providing sufficient illumination on the dart spots in your home exterior or garden.
For those who are skeptical when it comes to the quality as well as performance of the solar powered flood lights, it is known that the improvements in bulbs as well as solar lighting technologies have made great strides.
The fact is that many commercial and production firms who require lights on their surroundings especially during the nighttime are now using solar flood lighting. Many of these firms not only want to save on utility expenses, and more so, they are concerned about the environment. Evidently the alternative form of energy that is solar is every environmentally friendly and does not produce and release harmful products such as carbon in the air.
Solar flood lights, indeed, can be provider of lights for aesthetic purposes. It can effectively accent any feature of the outside areas of a home property. But for many, the security that it gives is good enough reason for a home owner to install these outdoor solar lighting.
For more solar flood lights, solar powered shed lights and other articles on outdoor solar lighting, do visit us at Solar Lights and Gizmos blog
Here's some things to think about before walking on the roof of a house. If you slip and fall off the roof you could get hurt seriously. For your own safety if you have no experience walking on a roof use extreme caution. I would even suggest using a ladder and moving the latter around the perimeter of the house if you are inspecting the roof for damage.
Here's some things to keep in mind before walking on a house roof.
1. If the building is above two stories hire a contractor especially if you think the roof has building damage.
2. If the roof is too steep stay off. This could be extremely hazardous to your health.
3. If the roof is severely damaged and has loose shingles or tiles, this could create a safety hazard as you slip on one of these loose shingles and possibly fall off the roof.
4. You should stay off the roof at all costs if there is snow or ice. Ice obviously is extremely slippery and would be difficult to walk on. The difficulty would be increased if the roof has a steep slope.
5. Now last but not least if the roof is wet you should avoid walking on it until it is dry. I have been on wet roofs before and personally slipped myself losing my balance but not falling off of the roof.
Climbing up on a roof and walking around is not child's play and should be left to an experienced professional . If you feel comfortable walking around on any roof please use caution. If you slip in the middle of the roof there is a good chance you will be able to regain your balance or have time to stop yourself before falling off.
I would suggest using caution near the edges of the roof. If the roof is too steep or you don't feel comfortable, why risk serious injury. Use common sense along with the proper ladders to ensure your safety and "Think before walking on a house roof."
Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.
Water Heater DamageWhat a great idea using your old side walk or driveway to build a nice stairway for your front or back yard. Using the old concrete instead of sending it to the landfill. Wow talk about earth friendly. Who would have thought that using recycled concrete would create a beautiful center piece in your landscaping plans.
That's enough about that lets get to the nuts and bolts of building the stairs. I came across the idea by visiting one of our favorite breakfast stops in Fallbrook. I had been walking down these stairs for quite a while when it dawned on me that the stairs where kind of jagged. When I took a closer look I couldn't figure it out, What kind of building materials did they use.
Then I realized it was recycled concrete in other words someone's old side walk. They even used the old concrete to make some nice planter boxes and retaining walls. The whole area really looks nice. The landscaping created natural look with a old world look to it.
How do I build the stairs using recycled concrete? Simply put first thing you need to do is get some recycled concrete. If you are going to be tearing up a old sidewalk, driveway or patio then you won't have to look far.
If not you can contact some local general or demolition contractors. They would love to have someone haul away their concrete. The reason for this is they have to pay around five hundred dollars for every ten tons hauled away from the jobs they are working on.
The more recycled concrete you need the easier it will be to get it. If you need a lot you will be able to contact a concrete recycling plant and get the phone number to a local contractor that hauls broken up concrete to their plants. These people can drop off a large load if you have a large area to drop it.
Remember that most contractors don't want to be bothered because they are busy working or planning on working. The easier you can make it on the contractor the more likely you will get what you want from them. They usually aren't interested in doing extra work just to make you happy. You can get a lot by being courteous from most people.
Now that you have the concrete you can start building. The concrete will be stacked on top of the other concrete to form the steps. Depending on how long of a stairway you are building you will have to level the dirt and stack the recycled concrete to make the stairs.
Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.
Visit us now for more great Home Remodeling Tips
Home Door BooksCeramic tile installation over many materials will work just fine. But will ceramic tile over linoleum work? That's a good question and the answer is ... it depends!
Probably the most important step in a successful tile installation project is preparing the backing - the surface over which the tile will be installed. Save time and money by properly preparing the backing so that's it's solid and of the right material. Backings must be flat, solid, smooth and clean. Install tile over a springy surface and you'll have a failure. Any movement will produce cracking of the grout and maybe even cracked tiles.
You can install tile over many surfaces including linoleum or vinyl. Tile is also installed often over old tile, plywood, brick, wall board and cement board. As long as the surface is flat, solid, smooth and clean you can use it as a backer. Now the surface may require proper preparation and the proper adhesive. Your tile supplier can help with these decisions.
Ceramic tile over vinyl works if the backing is smooth, clean and tightly in place. Any movement of the flooring will likely crack the grout. Certain types of vinyl flooring are cushioned so that they will flex. These floors will not work because of the movement. A cushioned floor should be covered with plywood or cement board. You could also remove the flooring and eliminate that layer.
Be careful when removing old resilient flooring. Until 1986, many floors contained asbestos, which is a health hazard if fibers are released into the air. The only way to know whether this flooring contains asbestos is to have it tested. The best way is to just assume older floors contain asbestos. Don't sand the floor. Usually the best approach is to tile over the floor. If the floor is loose, just cover it with exterior plywood.
Installing ceramic tile over linoleum will work great with the proper preparation and adhesives. Once you have the right base, installation is just like any other base. It's often the best way to cover older resilient floors.
Puzzled about how to install tile? Visit our site for more tips on ceramic tile installation.
Al Bullington invites you to visit http://www.InstallingCeramicTile.net for answers to your questions.
Your thinking about remodeling your home. You have asked everyone you know if they have a good contractor they trust or do they know anyone who does. You might have read a few articles like this or visited a couple of web sites to get as much information as you can about dealing with contractors during a house remodel.
Now the time has come for you to take the first step and call one of the contractors. You have spent some time looking through books and magazines to find just what you want done to your house. You have a idea of how much money you are going to spend if the job can be done exactly how you envision it.
You have called the city or county building department in your area to find out what is required from them in the way of building permits. If you have done some of these things you are ahead of most homeowners. There are a few of you that do know what can be done with a rough idea of how much the project will cost. A ball park figure lets say.
Most of the home remodeling Anxiety is caused from the miscommunication or no communication. The biggest problems I have had are from some sort of communication misunderstanding. I have been very lucky with having less than a handful of what I would consider a major home remodeling problem.
Do your best to explain what it is that you want done to your home. This also means understanding what it is exactly in writing what you are going to have done to your house. If you or the contractor do not understand this could lead to a possible anxiety attack and a problem.
Once you hire a home remodeling contractor the next step is to let them do their job. This doesn't mean. If you are watching them tear into a wall and the picture on the other side is about to fall off. Don't bother them. Of course stop them and remove the picture. We all make mistakes. If you see something isn't working out, talk to your contractor about it.
Don't be afraid of your contractor. If you see that what you had in mind isn't working out to your satisfaction. Explain the problem calmly and be to the point. I don't like it when someone beats around the bush and I never get to the problem. I would rather have them yelling at me, telling me what a jerk I am than taking two hours to make a point I have to drag out of them anyway.
If you do come to a problem that neither one of you can solve or you think the other one is at fault for whatever reason. You can contact the Department of Consumer Affairs and explain your situation to them. There is a good chance if you need a arbitrator they will set up a time and day for you and your contractor to meet. The arbitrator will come to a final decision for the both of you and that will be final. Of course their is always the Supreme Court... Well we don't want to go that far do we.
Most of the time if you have everything in writing in the form of a contract you shouldn't have any problems. If you do there is a great chance they will be able to be resolved quickly.
Doing major remodeling to your home can be extremely stressful at some points. Listen to your contractor when he is giving you advice on how to deal with the stress. He is a good source of wisdom especially if he had been doing it for years.
Resolving home remodeling anxiety will be a little more difficult during the construction process. It is very important to think the remodeling project through all the way to the end if you can. Try to think about worst case scenarios and figure out the best possible solutions before they happen.
Flying off the handle sometimes causes hammers and humans to lose their heads, as well as their effectiveness. William Arthur Ward
For more helpful home improvement information visit: http://www.gregvan.com
Greg Vanden Berge has been in the home building and remodeling business for over 30 years. With this knowledge he has created a few websites that provide useful information for home owners as well as contractors. His main goal is to educate professionals in the home related businesses, dealing with problems that can easily be avoided with just a little bit of information.
His website http://gregvan.com provides all kinds of answers to remodeling and new house building issues that could create major damage as well as possible damage to your pocket book.
Visit us now for Home Improvement Tips
Structural Engineering Books
